← All projects

Hacktor Watch

An open hardware smartwatch with firmware you can shape. Build it, program it, wear it.

Status
active
Log
1 entry
A Hacktor Watch with a red strap on a wrist, its round screen showing the word Hello.

Hacktor Watch is an open hardware smartwatch with firmware you can shape. Start from the hardware design, or boot into Arduino, NuttX or Zephyr to prototype your own apps.

The project has its own website at hacktorwatch.com, and the design files and firmware are on GitHub at hacktorwatch/Hacktor-Watch-2.0.

At a glance

Subsystem Spec
Processor ESP32-S3, dual-core 240 MHz, Wi-Fi and BLE
Display 1.28” color LCD, 240 × 240, capacitive touch
Memory 32 MB external SPI flash, 8 MB PSRAM
Sensors 6-axis IMU, microphone
Output I2S amplifier and speaker, haptic driver
Power 250 mAh LiPo, USB-C charging, fuel gauge
Software Arduino, NuttX, Zephyr
Block diagram of the watch: an ESP32-S3 connected to the LCD and touch panel, microphone, audio amplifier, PSRAM, NOR flash, IMU, haptic driver, fuel gauge, battery charger and two DC/DC converters.
Hardware block diagram.

Project areas

  • Hardware — schematics and PCB design.
  • Mechanical — enclosure and assembly files.
  • Arduino — Arduino-compatible APIs to prototype quickly and teach.
  • Zephyr — an RTOS application configured with Devicetree and Kconfig.
  • NuttX — a POSIX-friendly RTOS on the watch for real-time apps.

Project log

  1. article

    Ten years later, I built another smartwatch

    Ten years ago it took thirty of us to build a smartwatch at Vector Watch. This time there were two, and the result is open source.

Open full size ↗